FIND  A  MOLD  PRO SELL  US  YOUR  HOUSE AVOID  FORECLOSURE DIY  BATHTUB  REFINISHING GARAGES
Black Mold Education ~ Home Improvement & Repair Projects & Articles ~ Do It Yourself Home Repair ~ Toxic Black Mold ~  How to Kill Toxic Black Mold ~ Mortgage Refinance ~ Contractors ~ We Buy Homes ~ Refinancing ~ We Buy Homes ~ Prescreened Contractors
Serving YOU since 1997

Do It Yourself Home Improvement
in West Houston & Katy, Texas

--
" We're Bettering YOUR Life by Improving Where YOU Live It "

Click on the links below to view Showcases of our latest Home Improvement work in the Houston / Katy, Texas area.

Kitchens & Bath

Patios & Pavers

Decks & Pergolas

Irrigation / Fencing

Interiors / Flooring

713-679-4175

HomeOur BlogContact Us

For a Free Estimate on Your Home Improvement & Remodeling Projects in the
Greater Houston and Katy, Texas area, Call or Text Us at 713-679-4175

Your Home

INTERIOR SHOWCASES
EXTERIOR SHOWCASES
DIY REFINISHING PAGES
DIY HOME PROJECTS
GREEN HOME SECTION
HINTS, TIPS & TRICKS

We Buy Homes

WE BUY HOMES FAST  
AVOID FORECLOSURE
STOP FORECLOSURE

Toxic Black Mold

BLACK MOLD EDUCATION
BLACK MOLD MAIN PAGE
D.I.Y. MOLD CLEAN UP
BLACK MOLD 4 DUMMIES
BLACK MOLD SOLUTIONS

Find a Home Pro
Over 5 Million Served

FULL LIST OF PROS
INTERIOR CONTRACTORS
EXTERIOR CONTRACTORS
DECKS & LANDSCAPE
HEATING / COOLING
MOLD TESTING PROS
BLACK MOLD REMOVAL
SCREENING PROCESS

The Corner Post

STORM / WEATHER PAGE
2013 JOBS AVAILABLE
PRIVACY STATEMENT
SITE DISCLAIMER
SITE MAP
-

-

Last Updated
03/09/14 09:13 PM

--

Do It Yourself Toxic Black Mold Clean UpDo It Yourself Toxic Black Mold Clean Up

1. To Eliminate Mold, You Must Eliminate Water Intrusions
-
Most importantly
, the source of the water accumulation must be identified and fixed or fungal growth will continue to occur. If you have a high relative humidity in a room or area (55% or higher), then you should strongly consider a dehumidifier. To determine the relative humidity, you will need a relative humidity sensor, also known as a moisture meter or hygrometer.

-

If you have experienced severe flooding or a water leak, then you want to remove or pump out the standing water, followed by drying the area. If the area is really wet, you will want to use fans and dehumidifiers. You may also want to move wet items away from walls and off floors.

The quicker you address the problem, the less extensive the damage will be since it may only take 24-48 hours for toxic black mold to germinate and grow. Prompt remediation of contaminated areas and materials should be the primary response to water intrusion and indoor fungal growth.

2. Minimize Dust and Seal Off Area (Negative Pressure)

Before removing the black mold, take the necessary steps to prevent the toxic black mold spores from spreading to other areas of the house or building. Since toxic black mold spores will likely be stirred, becoming airborne during the cleaning process, you need to properly contain each area being cleaned, while also minimizing dust (a primary means of transportation for mold spores).

Toxic Black Mold Containment:

Each room or area should be cleaned separately, one at a time. Before cleaning each room or area, you should seal it off as best as you can. This will prevent the toxic black mold from disseminating to other areas of the home or building while it is being cleaned, since cleaning can disturb and stir up the mold, causing mold spores to become airborne. 

Once they become airborne, they can spread to other areas to germinate and colonize, unless the area being cleaned is properly sealed.

Properly sealing (or containment) of a room or area consists of using plastic sheeting sealed with duct tape to cover doorways, vents, and other openings to occupied areas of the home or building.

If possible, you should place an exhaust fan next to an open (or partially open) door or window that is open to the outdoors. This will create negative air pressure, which will direct air flow outside, and therefore mold spores that have been stirred during cleaning will also be channeled outside. Just make sure the door or window is not near an air exchange that brings outdoor air into the home.

You should also turn off the HVAC system before cleaning Toxic Black Mold.
Don't Spread it around your Home or Business.

Minimizing Dust:

Maintain dust levels as low as possible during cleaning to prevent spores from becoming airborne and spread to other areas. This will reduce the risk of exposure for those who are cleaning while reducing the potential for the mold spores landing and germinating in other parts of the home or building.

You may want to use an air purifier to minimize the airborne particulate, which allows mold spores to disperse to other areas of the home or building.

Ionizers are typically better than air filters, since they can remove smaller particles from the air, and do not rely on particulate passing through them in order to remove them from the air.

3. Cleaning the Toxic Black Mold

If the surface(s) you are cleaning are dry, or mostly dry, you should lightly mist them with water before cleaning the mold. If the mold is too dry, then the mold spores will have a much better chance of becoming airborne while being disturbed during the cleaning process.

Once the surface is lightly misted (if necessary), then clean the affected area(s) with soap to remove as much of the mold as possible, and then apply a disinfectant to kill mold spores that are left behind. Thoroughly clean all surfaces in the area that contain visible mold, and even surfaces that do not have visible mold, since mold spores are microscopic very durable, and can remain dormant for months or even years.

Once a surface has been cleaned and disinfected, it should be completely dried.

In which case, if mold spores are left behind, and are introduced to moisture again in the future, then you will have another significant mold growth problem on your hands.

Non-porous material such as metals, glass, hard plastics, and semi-porous materials include wood, concrete, etc, that are structurally sound with some visible mold growth may be cleaned and reused.

If the contamination is not too severe, porous material may be cleaned and reused.  If the damage is extensive and the mold growth has visibly destroyed porous items beyond repair, they may need to be removed and replaced.  Examples of porous materials are ceiling tiles, insulation, wallboards, carpet, soft furnishings, clothes, papers/books, etc.

All material that has been cleaned should be completely dry and visibly free of mold before it is reused and before sensitive individuals are exposed to it.  

4. Removing the Toxic Black Mold

Carefully remove and discard mold and mold-infested materials into heavy-duty plastic bags. Double Bag. Do not transport the bags throughout the house, especially other clean areas. Doing so will risk further spreading and re-germinating of the mold. 

Instead, it is a good idea to get the bags outside through a window or other opening accessible to the room/area being cleaned, if possible. These bags with the mold contaminated materials can be taken to any landfill

5. Verifying the Mold Clean-Up Job was Successful

1. First and most importantly, you must have completely fixed the moisture problem to rid the home of excess water.

2. Mold removal should be complete. If this step is completed properly, there should not be any visible mold and musty/mildewy odors present (toxic black mold may cause staining and cosmetic damage).

3. There should not be any more signs of additional moisture/water damage or any recurring mold growth in the home/area.  If either of these problems resurface, there may be an underlying or hidden problem and a more extensive investigation of the home is necessary.

4. Physical symptoms of the occupants should be greatly reduced and even ceased.


Protecting Your Health During Black Mold Clean-Up

Exposure to molds can occur during clean-up procedures since mold counts can be extremely high in the contaminated area. However, there are ways you can minimize your exposure to mold during clean-up procedures.  It is not recommended for those who may be at increased risk for experiencing adverse health effects to perform the clean-up procedures or be in or around the area during clean-up, such as those with any kind of lung or allergy-related health conditions (like asthma or allergies).  

Also, if the mold growth is extremely severe, you may need a professional to remediate the problem. If you do require a professional mold remediation contractor, make sure they are certified, and have multiple references you can check to validate the quality of their work.

1. Wear Respirator

Wear a medium-efficiency or high-efficiency filter dust mask or respirator to protect against the inhalation of mold spores. For the best protection, choose a respirator designed for particle removal such as the model N95 or TC-21C particle respirator.

2. Clothing

Wear protective clothing that is easily removed, cleaned, and that covers all areas of the body to prevent against any dermal (skin) exposure.  You may even want to choose a protective outer layer that can be discarded such as a Tyvek suit. Other personal protective equipment that should worn are rubber gloves and eye goggles.

3. Evacuate

Ask any family members or houseguests to leave the area during clean-up, if they are not part of the clean-up process. Especially if they are in a high risk group for experiencing adverse health effects from the exposure to mold.

4. Work in Short Intervals

If the damage is extensive and requires many hours of cleanup, work over short time periods and rest in a fresh air location.

5. Moldy Materials

Enclose all moldy materials in sealed, plastic bags before carrying them away.

6. Seal Off Area

Hang plastic sheeting to separate the work area from the rest of the home. Also, use plastic to seal off ducts in the area where you are working, to prevent spores from traveling through the ductwork into other parts of the home or building.

7. Containment

Remove the outer layer of work clothing inside the work area, and wash it separately or bag it for disposal.

8. Air Out / Dry

Air the area out well after cleaning is finished.  It may be helpful to use fans and dehumidifiers.

9. Air Purification

Using an air purifier will reduce the spores in the air that can be inhaled, or carried to other parts of the home or building to re-germinate.

Ionizers are typically better than air filters, since they can remove smaller particles from the air, and do not rely on particulate passing through them in order to remove them from the air.

Cleaning Black Mold in the HVAC System

For the most part, the same cleaning procedures listed above apply to cleaning the HVAC system. Here are some additional things to remember though:

1. Clean the cooling coil (using same procedures listed above). If there is any rusting, then it should be replaced.

2. Clean the drain pan (using the same procedures listed above). If there is any rusting, then it should be replaced.

3. Remove and properly dispose of any interior insulation (insulation inside the ductwork).

4. Replace the filter, preferably with a HEPA filter.

5. Have the ducts professional cleaned only if they are very dirty. Make sure your duct cleaning professional does not allow the dirt and dust from the ducts to enter into the rest of the home or building.

A Special Thanks to Toxic-Black-Mold-Info.com for their help in building this section.
 

CustomerService@StartRemodeling.com
--
Use of this site is subject to certain Terms of Use which constitute a legal agreement
between You and StartRemodeling.com.
Our Disclaimer  Privacy Statement
-
A Christian Owned Site - Prayer and Faith are Powerful

We Proudly Serve all 50 states in the U.S.A.      StartRemodeling.com     We proudly serve Canada
1997 - 2014 All Rights Reserved